# Question: How Many Square Feet Does A 3 Ton AC Unit Cover?

## What SEER rating do I need?

The minimum standard SEER for air conditioners is 13, though most modern air conditioners have a SEER that ranges from 13 to 21.

Most older A/C systems are rated at around 8 or 9, so even the lowest available SEER rated system you buy today will be much more energy efficient..

## What is the difference between a 2 ton and 3 ton air conditioner?

Differences in Air Conditioner Size A two-and-a-half ton air conditioner has 30,000 BTU’s and can cool a home sized 1,201 to 1,500 square feet while a three ton unit has 36,000 BTU’s and is designed for homes 1,501 to 1,800 square feet.

## Does a 2 story house need 2 AC units?

You need either two smaller units or one larger unit to run the entire house. The added cost of the second unit may be offset by the energy savings. Much depends on your house and how you use the air conditioner.

## How many sq ft will a 2.5 ton AC cool?

Air conditioners that are 1.5 tons can cool off a space that is 600-900 square feet. Units that are 2 tons can cool off 901-1200 square feet spaces. Units that are 2.5 tons can cool off 1201-1500 square feet, etc.

## How do I calculate what size air conditioner I need?

To calculate the size, simply multiply the length times the width of the room or area to be cooled. Then, as a practical number, multiply that total times 25 BTU. This allows ample cooling, whether it is a rainy, moist day or a hot, sunny, humid day.

## How much more efficient is a 16 SEER vs 14 SEER?

According to the Kobie SEER Energy Savings Calculator, a 16 SEER unit uses about 13% less energy to produce the same amount of cooling as a 14 SEER unit of the same size. That means that for every \$100 you’d pay to run your 14 SEER unit, you could save \$13 by upgrading to a 16 SEER unit.

## How many BTU is 2400 square feet?

For example, if the bedroom and office area zone is 1,800 square feet and the living areas and kitchen are 2,400 square feet, add together the recommended BTUs for each. You’ll need between about 180,000 and 280,000 total BTUs for your home based on the climate and house factors considered in the calculator.

## What size AC unit do I need for a 2500 sq ft house?

STEP 1: Determine how many BTUs of heating and tons of AC you needHouse Square FootageBTUs Needed1,200 – 1,40023,0001,400 – 1,50024,0001,500 – 2,00030,0002,000 – 2,50034,00010 more rows

## What size air conditioner do I need for a 3000 square foot house?

ZONE 1ZONE 23 Tons1501 – 1800 sf1501 – 1850 sf3.5 Tons1801 – 2100 sf1851 – 2150 sf4 Tons2101 – 2400 sf2151 – 2500 sf5 Tons2401 – 3000 sf2501 – 3100 sf3 more rows

## How many square feet will 1 ton of asphalt cover 2 inches thick?

The area that 1 ton of asphalt covers depends on the thickness of the asphalt to be used; for a half-inch thick section of asphalt, 1 ton will cover approximately 316 square feet, while 1 ton of asphalt will cover 79 square feet when laid several inches thick.

## Which is better Trane or Carrier?

In the comparison of Carrier Vs. Trane air conditioner in terms of energy efficiency, Trane finds its superiority over the latter one. All the models belonging to the three tiers produced by Trane are more energy-efficient than that in Carrier. … Carrier AC units offer 25 percent of energy savings.

## How much does a 3 ton AC unit cost?

Average AC Unit Prices by Size or CapacityCentral AC Unit SizeAC & CoilAC & Coil Installed Cost2.5 Tons, 30,000 btu\$1,525\$2,6953 Tons, 36,000 btu\$1,650\$2,9903.5 Tons, 42,000 btu\$1,780\$3,2504 Tons, 48,000 btu\$1,860\$3,3503 more rows

## What size AC do I need for 2000 square feet?

If your home is 2000 square feet, you can calculate your HVAC needs the same as you would for a 1600 square foot home. Assuming one ton of cooling capacity can cool 400 square feet of your home, you’ll need about 5.0 tons of air conditioning capacity. Multiply this by 12,000 BTUs, and you’ll get 60,000 BTUs.

## How many tons of AC do I need per square foot?

0.0016 tonsSimple answer: You need 0.0016 tons of AC per square foot. In general, for every 600 sq ft, you need 1 ton of AC. This is a general estimate.

## Which AC is best for 300 sq ft room?

If a Room sq ft is above 201-300 sq ft, then go for 1.25 or 1.5 Ton AC. 4. If a Room is big say above 301-500 sq ft, then better go for 1.5 Ton AC.